Too much bromine in your hot tub can corrode your hot tub parts, damage your pump, and even cause respiratory issues. Thankfully, lowering your bromine is an easy process. And depending on your levels, you might not even have to do anything at all. There are two easy ways to lower bromine. The first involves three easy steps:
Let’s dive into the steps in this article (plus the second method). But first, you need to know some base information.
My fool-proof system for keeping any hot tub clean and clear at all times. Our course covers every type of hot tub, including portable spas, inflatable hot tubs, inground hot tubs, swim spas, and more. This is the LAST and ONLY hot tub guide you'll need.
It’s hard to tell if you have a high bromine level by smell. Bromine has a low chemical odor, which is why it’s commonly used in indoor hot tubs and swimming pools.
The most reliable way to know if you’ve got too much bromine in your hot tub is to test your water with test strips. Most test strips come with both bromine and chlorine readings, but make sure you confirm this before purchasing.
Tests for 7 important chemistries in seconds: Total Hardness, Total Chlorine, Total Bromine, Free Chlorine, pH, Total Alkalinity, and Cyanuric Acid.
If you’re not sure how to test your water accurately, check out our guide on Hot Tub Water Testing.
Testing your hot tub water once per week (and more often if you use it frequently) will ensure you’re not over-sanitizing your water with bromine. High bromine levels can ruin your hot tub equipment over time and be unsafe for hot tub users. However, if you’re adding bromine to the water (granules, tablets, floaters, or an automatic feeder), make sure you’re dosing the water properly and testing after adding chemicals.
Also, be sure you’re testing and balancing your other levels, like pH and alkalinity, regularly, too, since these can affect your bromine.
Unlike bromine, chlorine has a strong chemical odor. When you add chlorine to your hot tub or pool water, it’s measured as Free Chlorine. As Free Chlorine fights contaminants, it becomes a chloramine (measured by Total Chlorine). This is what causes that strong bleach-like smell. FYI, Free and Total Chlorine levels should be between 1-3 ppm (parts per million).
Your hot tub bromine levels should be between 3-5 ppm (parts per million). If you use a mineral floater or dispenser, you only need 1 ppm of bromine. But keeping your bromine levels in check is one part of balancing your water chemistry. Here are the right chemical levels for a hot tub.
Keep bromine between 3-5 ppm (parts per million) in your hot tub. This concentration is effective enough to sanitize your hot tub while remaining gentle on your skin and eyes.
Bringing down your bromine levels is one of the simplest problems to fix in a hot tub. All you need is patience and some fresh water.
It seems obvious, but if you’re adding too much sanitizer, stop adding new doses of bromine to your water. That means turning off your automatic chemical feeder, removing your floater, or stopping any source that’s adding bromine.
Once you’ve stopped adding bromine, your bromine levels will naturally decrease over time. This usually takes a day or two, but you can speed up the process with water evaporation.
Remove your hot tub cover and turn on your jets to help the bromine evaporate. As the water evaporates, you’ll notice your water water level drop. Make sure your water level doesn’t drop below the skimmer port while your hot tub is running. And be sure to stay out of the hot tub while your bromine levels are high.
Once your water level has dropped a few inches, it’s time to add new water. Refill your hot tub with fresh, filtered water and let the water circulate. This should lower bromine levels. Then, test your water again. Your sanitizer levels (bromine) should have dropped.
Keep in mind that all of your other levels (like total alkalinity and pH level) will drop, too. So, test and rebalance everything. I recommend testing your spa water with test strips. They’re quick and easy to use.
If your bromine is still too high after this process, consider removing some of the spa water manually. You can use a bucket, a hose siphon, or a submersible pump (sump pump) to remove more water. And if you need help draining your hot tub water, be sure to check out our other guide on How to Drain a Hot Tub.
If you don’t want to drain your hot tub or wait for your water to evaporate, you can use a chemical called chlorine or bromine neutralizer. It helps lower bromine levels (and lower chlorine). But this chemical will continue to destroy bromine in your hot tub until the neutralizer is completely used up. It’s easy to use too much, so I recommend only using it in a pinch.
While these products are usually labeled as chlorine neutralizers, their active ingredient (sodium thiosulphate) works in bromine hot tubs, too.
This chemical removes chlorine and bromine from swimming pool water.
Keeping a simple, weekly hot tub maintenance routine is the best way to keep your bromine levels from fluctuating up or down.
Also known as oxidizer, non-chlorine hot tub shock helps revitalize your chlorine or bromine so it can actively sanitize your water. Use an oxidizer at least once a week but ideally after each hot tub soak to keep your water sanitized.
I sent an email to roughly 20,000 hot tub owners and asked if they ever had a problem with high bromine. They had questions, and I answered them here.
Start by partially draining and refilling it with fresh water. This dilutes the bromine concentration. You can also leave the hot tub cover off and let it breathe. Bromine dissipates faster when exposed to air and sunlight. If you’re in a rush, use a neutralizer like sodium thiosulfate.
It’s not a good idea. Overexposure can irritate your skin and eyes. And might even mess with your lungs. Always keep bromine levels within the recommended range, which is typically 3-5 ppm. If they’re high, hold off on your hot tub plans until you’ve adjusted the levels back to the safe zone.
High bromine levels don’t cause a high pH in your hot tub. These are two separate parts of water chemistry. Bromine is a sanitizer, while pH measures the acidity of the water. However, imbalances in one can impact the other. Regularly test and adjust both for optimal hot tub health.
Simply adding too much bromine via granules, tablets, or shock. It can also happen if the hot tub is underused while bromine continues to be added at the same rate. Always adjust your bromine additions based on how much you use your hot tub.
Test your hot tub water for bromine using fresh and dry test strips (or a liquid test kit). If readings consistently show levels above 5 ppm (parts per million), it’s a red flag. High bromine causes skin and eye irritation. Always test your water regularly to keep things in check.
Matt is the founder of Swim University. He's been in the pool industry since 1993. His mission is to make pool care easy for everyone. Each year, he continues to help more people with water chemistry, cleaning, and troubleshooting.
No. Hot tub cyanuric acid (also known as CYA or chlorine stabilizer) is not necessary. It can actually cause more harm than good. Let's learn more.
Do you know how to shock your hot tub? All it takes is knowing what type of hot tub shock to use and when to add it.
Using bromine in your hot tub is eaiser than chlorine. But it only works if you know when to add it (with other chemicals). Here’s a quick guide.
