Download these FREE printable cheat sheets to help you simplify pool maintenance for crystal-clear water.
No matter how easy a pool is in terms of maintenance, you still have to put in a little effort when the weather starts to turn from “Let’s hit the pool!” to “Let’s get hot chocolate.” Unlike regular above ground pools, Intex models require special care when colder temperatures roll in.
That said, it really doesn’t take a ton of work to winterize Intex pools. You just need to plan ahead of time and be prepared to tuck your pool away for the season. Trust us, you don’t want to risk puncturing your wonderful (and expensive) pool by skipping out on this end-of-summer chore.
When you close or winterize an inground or regular above ground pool, it means you remove equipment or dry out pipes that can be damaged by freezing temperatures. You also add extra chemicals to your water to keep bacteria, algae, and mold from growing over the winter months while your pool is covered and not in use.
Winterizing an Intex pool is a little different. Because they’re at least partially inflatable, closing your Intex for the season could mean the difference between having a pool next summer and having to buy a new one.
The lightweight materials Intex uses make it fast and easy to set up a pool. But this ease comes with the downside of the pool being more vulnerable to ice damage. Leaving your Intex pool out in colder temperatures can completely rupture your pool lining. That’s a mess you don’t want to clean up or repair. And if the damage is bad enough, you may not be able to repair it at all.
This is why the Intex pools manufacturer strongly recommends draining and disassembling your pool if the temperatures in your area drop to or below 41°F (5°C). And so do we. We don’t want your cozy winter by the fire to be ruined by a messy pool collapse.
To prevent ice damage, it’s best to store your pool well before freezing temperatures are a possibility. It isn’t just about getting ahead on this important chore. It’s that procrastination can really trip you up.
If you get a weather alert about a cold front coming through your area in two days’ time, you may not even have time to close your Intex pool.
That’s because Intex pools are made to be drained with a regular garden hose. That’s a small volume of space for a significant amount of water, especially if you have a larger model. So plan for this process to take a few days.
Yes, you read that right. Days.
We get it. There’s a huge time investment involved in breaking down and setting up your Intex pool every season. If you want to winterize your Intex pool without breaking it down, you can. Just remember how susceptible they are to ice damage, and consider whether you want to run the risk of ruining your pool for the sake of skipping the chore of closing it.
If you live in a region with a warmer climate and milder winters, though, you can close your Intex pool without breaking it down.
The supplies necessary to winterize Intex pools will vary by climate. Cold means your winter temperatures get below 41°F (5°C); warm means you’re above that year-round.
One thing you’ll notice: the first item your tool list is your owner’s manual. If yours is lost in the garage void, don’t worry. You can download it from the Intex website by looking up your pool model.
If you’re using an Intex salt water system, you can use the breakdown instructions without any changes for storing your pool. If you’re keeping your pool up over the winter, just make sure the winterizing chemicals you use are compatible with salt water pools.
It might seem like a lot to do, but trust us, this is kind of like cooking with a slow cooker. Just go step by step and you’ll be ready for winter in … well, a couple of days, but you won’t have to be active the whole time.
You don’t want to clog up your pipes with stray debris, so do yourself a favor and thoroughly clean your water and vacuum the sides and bottom of your pool.
Your city or county may have specific instructions for disposing of swimming pool water. Always check before you drain to make sure you don’t violate any local ordinances or accidentally harm the environment or your own property by draining down a storm drain or into your yard.
Important: Before you start draining your pool, disconnect it from all power sources.
If you have a skimmer, ladder, or any attached accessories in the pool, remove them. Clean and dry the parts before storing in a clean, dry area for the winter. If your strainer grid—the screwed-in portion connecting your pool to your filter—is exceptionally dirty or filled with gunk, remove and replace it.
If you have any inflatable parts, make sure they’re properly inflated. Clean any debris from the water and vacuum the sides and bottom of the pool. It’s going to be sitting covered for several months, so you don’t want anything gross stewing till spring.
If you’ve chosen not to drain your pool, once it’s clean, balance the water chemistry. Shoot for a pH range of 7.4 to 7.6 and total alkalinity between 100 parts per million (ppm) and 150 ppm. Then skip down to the warm weather instructions in step 5.
Whether you have an inflatable or metal frame, the same simple draining instructions apply. Check the drain plug on the inside of the pool to make sure it’s plugged in. Do not unplug it. The water will take care of it later.
Find the drain connector. Hopefully you’ve kept it in a safe spot, since it’s one of the few parts you didn’t need when you set up your pool. Attach the female end of the hose to the thin end of the drain connector. (In case you don’t remember, the female end of the hose is the part you attach to a faucet or spigot.)
Important: Once the hose is securely connected, point the other end of the hose away from your house and any other structures. Emptying water near a building’s foundation can cause some serious structural damage, so it’s critical the flow of water is directed away from any structures.
Remove the cap from the drain valve, but don’t attach the drain connector and hose just yet. Do one last check to make sure your hose is in the proper draining position because the pool will start to drain the second you attach the connector.
When you’re sure everything is set, push the drain connector into the valve. It will disrupt the inner drain plug, and the water will begin to flow. Tighten the connector to the valve to ensure it doesn’t come loose while draining.
Remember: a tiny hose plus a big pool means a long drain time. Check in on your pool’s progress occasionally to make sure the connector is still tightly secured.
Important: Keep an eye on the hose while the pool is draining to make sure it doesn’t move, and remains directed away from your home and other structures.
This is a good time to get a headstart on cleaning. As the water level goes down, you can start cleaning the pool walls with a mild all-purpose cleaner and soft cloth.
Important: Do not use any strong or abrasive cleaners on your lining. They can damage it, costing you extra money in repairs or to replace the liner.
The water will eventually lower to a point where it’s unable to reach the drain. Help the rest along by carefully lifting the side of the pool away from the drain until the pool is completely empty.
Add winterizing chemicals to the clean water. Using slow release chemicals to winterize Intex pools can save a lot of worry throughout the off-season. You can also add extra shock and an algaecide to the water for good measure.
A copper-free algaecide to help prevent your pool from turning green.
Allow the chemicals to circulate for a day.
Remove the drain connector and your garden hose before replacing the inside drain plug and the outside drain valve cap. These get folded up along with the wall, so this is the best way to store the parts without losing them.
Depending on your pool model, you either need to close your inlet and outlet valves, or plug in the inlet and outlet fitting to the inside of the pool wall. If you’re unsure how to do this, refer to your owner’s manual.
You’re not breaking down your pool, so skip to the warm weather instructions in step 12.
Wipe down the inside of your Intex pool with a soft cloth, warm water, and mild cleaner. Thoroughly rinse and drain any leftover water.
If your model has a frame, reverse your owner manual assembly instructions to take it down. Clean and dry the frame pieces before storing in a dry and secure location.
Let your liner air dry completely. Once the water has evaporated, sprinkle a little talcum powder or cornstarch on the liner to absorb leftover water and prevent excessive sticking.
Do you love or loathe folding fitted sheets? Just asking, because this process is kind of like that, since your goal is to fold a circle into a rough square. Like folding a fitted sheet, this just takes a little practice and know-how.
If you prefer visual aid, refer to your Intex owner’s manual. Once you have the liner folded, you can store it in its original packaging.
Tip: Let’s be honest. If you’ve never mastered folding a fitted sheet, folding your pool liner back into a square that fits in its original packaging might as well be an Olympic sport. If you’re not worried about medaling in that event, just make sure the liner is completely dry, and fold it as neatly as you can so you can put it away without it taking up too much space. No judgment.
Leaving water in your filter parts and pump can lead to unpleasant discoveries—like mold and bacteria—later.
Make sure all the water is out of your accessories, clean them up, let them air dry, and store them in a clean, dry area.
Because they’re incredibly affordable, it’s really not worth the effort to clean and reuse your Intex pool filters. Just make sure you have replacements on hand for next season.
If you’d rather do your part for the environment and get as much use out of that cartridge as possible, you can use filter cleaner on it. But once you can’t get it fully clean anymore, it’s time to replace.
Keep your liner, frame, pump, and filter hoses indoors in a dry area that is not exposed to freezing temperatures.
To make setup easier next season, make sure you keep all attachments together so you’re not digging through the garage or attic for a missing piece.
Turn off your pump and filter. Remove the hoses attaching them to the pool as well. Clean, sanitize, and drain the pump, filter chamber, and their hoses. Ensure they are completely dry before storing indoors in a dry, temperate location.
The last thing you need to do is cover your pool to keep leaves and dirt out of your water. Once that’s done, your Intex pool is officially winterized. Be sure to regularly clear any standing water from the cover when you get a lot of rain.
Warning: Intex pool covers are not pool safety covers, which means they won’t keep wayward animals or adventurous children from climbing across and falling in. Take appropriate measures to prevent accidents.
It might seem like a time-consuming chore now, but properly winterizing your Intex pool now can save you a lot of stress later. Most importantly, you won’t have to worry about ice damage ruining your pool.
Plus, you get your yard back for more weather-appropriate activities like jumping in piles of leaves and staging massive snowball fights. Between the peace of mind and extra space, you’ll love tucking your Intex pool away for those cold winter months.
Happy Winterizing!
Matt is the founder of Swim University. He's been in the pool industry since 1993. His mission is to make pool care easy for everyone. Each year, he continues to help more people with water chemistry, cleaning, and troubleshooting.
Taking care of your pool doesn't end when you put the cover on. Maintain your pool during the winter, and make next season's opening a lot easier.
Using a cover is only half the battle to protect your pool during winter. Use a pool cover pump to keep that cover clean.
Mesh or solid? Or maybe the new kid in town: hybrid? Which pool safety cover is right for you and your pool? Find out before you make that investment.
