If there’s no power coming to your hot tub, chances are good your ground fault circuit interrupter (GFCI) breaker tripped. Since you’re reading this post, you may have already experienced a flipped breaker only to have it trip again soon after.
A hot tub tripping a breaker isn’t an uncommon problem, and the potential causes are pretty easy to spot. You just have to know what to look for and where to look for it. Once you identify the problem, you may be surprised at how simple the fix is. A few repairs may require a professional touch, but that will depend on your electrical skill level.
My fool-proof system for keeping any hot tub clean and clear at all times. Our course covers every type of hot tub, including portable spas, inflatable hot tubs, inground hot tubs, swim spas, and more. This is the LAST and ONLY hot tub guide you'll need.
Near your hot tub, inside a metal box probably attached to the side of your house, is your hot tub GFCI breaker. It’s a black plastic switch that automatically flips when it experiences an electrical surge.
When the switch flips, it interrupts the electrical circuit, breaking conduction so no more electricity can pass through. In short (no pun intended), it prevents you from being electrocuted in your hot tub when someone has a few too many margaritas and accidentally knocks your stereo into the water.
Sometimes the breaker flips for reasons that have nothing to do with your radio. These common hot tub problems are pretty easy to troubleshoot on your own. Before you get started, grab a towel and a flashlight. They may make it much easier to find the problem.
Warning: Working with electricity, particularly around water, can be dangerous. Be sure there is no moisture where you’re working, and turn off the power supply when working directly with wiring to limit your risk of electric shock. If you’re not comfortable working with electricity, hire a pro to make the repairs.
Probably the most obvious reason your hot tub is tripping the breaker is the thing simply wore out. Age, power surges, and even a nearby lightning strike can render your breaker useless. Fortunately for you, it’s easy to determine whether your breaker is toast.
If you haven’t yet, try flipping it. Does it immediately trip again? If so, a worn or bad breaker could be your problem. To be certain, disconnect everything from the GFCI. Flip it back on. If the breaker trips, even with nothing connected to it, you need to replace the breaker.
Pop open the breaker box, shine the flashlight around in there, and see if you find any moisture inside. Rainwater, splashout, or flooding can introduce enough dampness to flip a hot tub GFCI.
The solution may be as easy as drying the inside of the breaker box with your towel, turning a fan or dehumidifier on near your outlet, and resetting the breaker once dry.
If the breaker flips even after it appears dry, you may need more extensive troubleshooting. If the breaker is encountering moisture often, you may need to replace the receptacle itself or move it farther from the spa.
This is inevitable. You can’t even get away from rust in outer space. It’s worth keeping an eye out for corrosion whenever you service your hot tub in order to limit the possibility of compounding problems.
Corrosion can cause components to malfunction, which could affect your water chemistry or cause further damage when they fail. Just imagine if you went on vacation and your filtration system failed to run per your programming. Ew.
Corrosion can occur near the hot tub GFCI or around spa components themselves. Inspect the breaker box, then inside your spa cabinet for any obvious signs of corrosion. Typically, you’ll see whitish powder or the appearance of rust around component connectors if corrosion is present. Carefully inspect wire connectors, ground wires, the control panel, and anywhere you can see component wiring.
Repairing corrosion depends on where you’ve found it and how extensive it is. You may be able to clean off corroded connectors with a wire brush or electrical contact cleaner and simply reconnect them. You may need to replace wiring if the corrosion is too extensive. If the dripping water is the cause of the corrosion, you’ll definitely have to repair a leak inside your spa.
While you’re looking for signs of corrosion, look for other signs of damage to component wiring, such as breaks or char marks. Also check all connections to ensure they’re snug.
Wiring Short: When two wires touch but they’re not supposed to, a surge of power causes your breaker to trip. This can also happen when a hot wire (one with power going to it) touches a ground wire. Not only will it trip your hot tub breaker, but it can even start a fire. Wires can accidentally touch each other in this manner if you’ve moved your spa, done work inside the cabinet, or if you have a pest.You can narrow down the offending wires by disconnecting each spa component one at a time. Flip the breaker and see if it trips. When it trips, you’ve found the misbehaving component. Start inspecting the wiring for that component.If the wires are touching because one came loose, you (or an electrician) can reconnect it and reset your hot tub breaker. Signs of damage or signs of a mouse nest mean you should be looking closely for more extensive problems, such as chewed wires. In those instances you might need to replace wires and connectors.
Burnt Wires: When dealing with electricity, a heat problem can become a fire problem in a blink. A short in the wiring is a fire waiting to happen. Old wiring can overheat. Hot components or component fires can also destroy the wiring. Shine the flashlight inside the breaker box and cabinet, and look for wires with melted insulation (the rubber coating around the wire) or blackened spots.Burnt wiring is tricky to fix. You’ll need to replace the damaged wiring, of course, but you also have to figure out why it got so hot in the first place. If you don’t have the skill to make these kinds of electrical repairs, this should be left to a pro.If you’re confident working with wiring, start by using a multimeter to check the voltage of wiring and components in your spa.
Loose Connectors: When you have work done on your spa, it’s moved around, or it just gets old, wiring connectors can come loose. If wires are even just a little loose, the electrical circuit can be interrupted. When a component is turning on and off due to circuit interruptions, the GFCI breaker may trip.Fixing loose connectors is pretty easy. Inside your spa pack, you may need to use a screwdriver to tighten the screws keeping wires in place. Alternatively, you may see plastic, plug–style connectors slipped out of place. Just give the plastic plugs a firm, little push to ensure they’re snug. And of course, if any connectors are broken or damaged, you’ll need to replace them.
All spas have at least a few electrical components, such as a heater. Even if you have an inflatable hot tub, it still has a control panel and heater.
If your hot tub is especially snazzy, it might also have towel warmers, a sound system, or interior lighting. If any one of your electrical components is misbehaving, it could be why the hot tub is tripping the breaker.
The simplest way to isolate a naughty hot tub component is to disconnect everything you can from the GFCI. Connect each component individually and flip the breaker. When it trips, you’ve got a winner.
Unfortunately, identifying the guilty component is only half the battle. You must also determine how the component is malfunctioning. Is the wiring bad? Did the component overheat? Is it grounded improperly? Is the device completely destroyed? This is more complex troubleshooting and may be best left in the hands of a professional.
One of the most likely offending hot tub components is the heating element. Your spa heater assembly is a metal tube that contains a heating coil. The hot tub water passes through the housing to be heated. If the coil isn’t hot, the water won’t heat up. If something is causing the element to malfunction, the hot tub breaker will trip.
Is water flowing back into the air blower or ozonator? Then it’s likely your hot tub is tripping the breaker. You can troubleshoot this issue by disconnecting the blower or ozonator from the breaker and flipping it.
This issue can pop up if your check valve is bad or your hot tub is overfilled. In either case, water makes its way back through the check valve to the blower or ozonator. Drain some water, if necessary, then replace the bad check valve. If the blower is wet, you may also need to replace it.
Compatible with almost any hot tub, this ozonator uses a corona discharge (CD) to kill up to 99% of bacteria, germs, and contaminants. Ozonators will help lower your chemical usage by up to 90%. And a CD ozonator works more efficiently and lasts longer than most UV ozone systems.
Whether you’ve got a plain Jane, an inflatable spa, or a hot tub that looks and sounds like you’re soaking in a night club, you’ll eventually experience electrical issues. The first sign of electrical problems is often the hot tub tripping the breaker. While it’s inconvenient when the GFCI trips, remember it’s there to protect you. It’s a symptom of a malfunctioning spa, just like a fever is a symptom of illness.
The tripped breaker gives you a starting point to identify and repair electrical problems right away, saving you further repairs and even preventing fire. Even when you can’t make repairs yourself, you’ll now be able to figure out what the probable cause is and maybe save yourself a few dollars hiring a repair professional. And then you can get back to enjoying your hot tub.
Happy Soaking!
Matt is the founder of Swim University. He's been in the pool industry since 1993. His mission is to make pool care easy for everyone. Each year, he continues to help more people with water chemistry, cleaning, and troubleshooting.
Find out what you need to do to troubleshoot a misbehaving hot tub high limit switch so you can go back to soaking safely.
Is your hot tub sitting stagnant because the spa blower isn't working and you're not sure what to do? All you need is a new blower and about half an hour.
Hot tub troubleshooting on your own can save you big bucks on simple hot tub repairs, plus let you know when to step back and call a pro.